Sony VPL-FH500L WUXGA Higher Installation projector

Περιγραφή
Τεχνικά Χαρακτηριστικά
Περίληψη Τεχνικών Προδιαγραφών

Display

Display system	3 LCD system

Display device

Size of effective display area	0.95” (24.1 mm)
Number of pixels	WUXGA (1920 x 1200)
Aspect ratio	16:10

Projection lens

Focus	Powered / Manual*1
Zoom > Powered / Manual	Powered / Manual*1
Lens shift > Powered / Manual	Powered

Light source

Type	*2 lamp
Wattage	330 W type
System	Twin lamp

Recommended　lamp replacement time*3

Lamp mode: High	6000 H
Lamp mode: Standard	8000 H*4

Filter cleaning / replacement cycle*3 (Max.)

Filter cleaning / replacement cycle*3 (Max.)	8000 H*5 (replacement)

Screen size

Screen size	40” to 600” (1.02 m to 15.24 m)*1

Light output

Lamp mode: High	7000 lm*6
Lamp mode: Standard	5600 lm613

Color light output

Lamp mode: High	7000 lm*6
Lamp mode: Standard	5600 lm613

Contrast ratio (full white / full black)*7

Contrast ratio (full white / full black)*7	2500:1

Input

Composite video > BNC	1
S video > Mini DIN 4-pin	1
Computer > 5BNC	1
Computer > Mini D-sub 15-pin	1
DVI-D (HDCP)	1
HDMI (HDCP)	1

Option board slot

Option board slot	1

Output

Monitor > Mini D-sub 15-pin	1*8

I/O, Control, Others

RS-232C > D-sub 9-pin	1 (female)
LAN > RJ-45, 10BASE-T/100BASE-TX	1
IR (Control S) input > Stereo mini jack, Plug in power DC 5 V	1
IR (Control S) output > Stereo mini jack	1

Keystone correction (Max.)*11

Vertical	+/- 5°

Power requirements

Power requirements	AC 100 V to 240 V 4.9 A to 2.0 A, 50/60 Hz

Power consumption

AC 100 V to 120 V > Lamp mode: High	490 W
AC 100 V to 120 V > Lamp mode: Standard	390 W*13
AC 220 V to 240 V > Lamp mode: High	460 W
AC 220 V to 240 V > Lamp mode: Standard	380 W*13
Power Consumption (Standby Mode) - AC 100 V to 120 V	0.1W (when “Standby mode” is set to “Low”)
Power Consumption (Standby Mode) - AC 220 V to 240 V	0.2W (when “Standby mode” is set to “Low”)
Power Consumption (Networked Standby Mode) - AC 100 V to 120 V	11.0 W (LAN) (when "Standby Mode" is set to "Standard"
Power Consumption (Networked Standby Mode) - AC 220 V to 240 V	10.0 W (LAN) (when "Standby Mode"" is set to "Standard")
Standby Mode/Network Standby Mode Activated	after about 10 minutes

Heat dissipation

AC 100 V to 120 V	1672 BTU
AC 220 V to 240 V	1569 BTU

Dimensions (W x H x D) (without protrusions)

Dimensions (W x H x D) (without protrusions)	530 x 204 x 545 mm 20 7/8 x 8 1/32 x 21 15/32 in

Mass

Mass	20 kg / 44 lb 1 oz

Supplied accessories

Remote commander	RM-PJ19

Optional accessories

Replacement lamp	LMP-F330
Projection lenses	VPLL-4008/Z4011/Z4015/Z4019/Z4025/Z4045/FM22/ZM32/ZM42/ZP41/ZM102
Projection lens adapter	PK-F500LA1, PK-F500LA2

Notes

Notes	1 Depends on lens. 2 Ultra high pressure mercury. 3 The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used. 4 With two lamp sequential use. 5 Same time as the lamp replacement is recommended. 6 When attaching the VPLL-ZP41. 7 This value is average. 8 From INPUT A and INPUT B. 9 From INPUT A. 10 Works as an audio switcher function. Output from a selected channel; not available in standby. 11 Depends on resolution. 12 Without wall mount. 13 The values are estimate. 14 Connect to USB Type-A terminal. *15 For replacement.

*1 Depends on lens. *2 Ultra high pressure mercury. *3 The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used. *4 With two lamp sequential use. *5 Same time as the lamp replacement is recommended. *6 When attaching the VPLL-ZP41. *7 This value is average. *8 From INPUT A and INPUT B. *9 From INPUT A. *10 Works as an audio switcher function. Output from a selected channel; not available in standby. *11 Depends on resolution. *12 Without wall mount. *13 The values are estimate. *14 Connect to USB Type-A terminal. *15 For replacement.

Διαθεσιμότητα:

Κατόπιν παραγγελίας