Display system
Display system | 3 LCD system |
---|
Display device
Size of effective display area | 0.79” (20.1 mm) |
---|---|
Number of pixels | XGA (1024 x 768) |
Aspect ratio | 4:3 |
Projection lens
Focus | Manual |
---|---|
Zoom > Powered / Manual | Manual |
Zoom > Ratio | Approx. 1.6 x |
Lens shift > Powered / Manual | Manual |
Lens shift > Range > Vertical | +51% |
Lens shift > Range > Horizontal | +/- 33% |
Throw ratio | 1.42:1 to 2.27:1 |
Light source
Type | *2 lamp |
---|---|
Wattage | 275 W type |
Recommended lamp replacement time*3
Lamp mode: High | 3000 H |
---|---|
Lamp mode: Standard | 4000 H |
Filter cleaning / replacement cycle*3 (Max.)
Filter cleaning / replacement cycle*3 (Max.) | 15000 H*5 (cleaning) |
---|
Screen size
Screen size | 40” to 600” (1.02 m to 15.24 m) |
---|
Light output
Lamp mode: High | 5000 lm |
---|---|
Lamp mode: Standard | 4000 lm*13 |
Color light output
Lamp mode: High | 5000 lm |
---|---|
Lamp mode: Standard | 4000 lm*13 |
Contrast ratio (full white / full black)*7
Contrast ratio (full white / full black)*7 | 2000:1 |
---|
Input
Composite video > Pin Jack | 1 |
---|---|
S video > Mini DIN 4-pin | 1 |
Computer > 5BNC | 1 |
Computer > Mini D-sub 15-pin | 1 |
DVI-D (HDCP) | 1 |
Audio > Pin Jack (L/R) | 1 |
Audio > Stereo mini jack | 2 |
Output
Monitor > Mini D-sub 15-pin | 1*8 |
---|---|
Audio*10 > Stereo mini jack | 1 |
I/O, Control, Others
RS-232C > D-sub 9-pin | 1(female) |
---|---|
LAN > RJ-45, 10BASE-T/100BASE-TX | 1 |
IR (Control S) input > Stereo mini jack, Plug in power DC 5 V | 1 |
Keystone correction (Max.)*11
Vertical | +/- 30° |
---|
Power requirements
Power requirements | AC 100 V to 240 V 3.8 A to 1.6 A, 50/60 Hz |
---|
Power consumption
AC 100 V to 120 V > Lamp mode: High | 380 W |
---|---|
AC 100 V to 120 V > Lamp mode: Standard | 310 W*13 |
AC 220 V to 240 V > Lamp mode: High | 360 W |
AC 220 V to 240 V > Lamp mode: Standard | 300 W*13 |
Power Consumption (Standby Mode) - AC 100 V to 120 V | 0.2W (when “Standby mode” is set to “Low”) |
Power Consumption (Standby Mode) - AC 220 V to 240 V | 0.3W (when “Standby mode” is set to “Low”) |
Power Consumption (Networked Standby Mode) - AC 100 V to 120 V | 11.0 W (LAN) (when "Standby Mode" is set to "Standard") |
Power Consumption (Networked Standby Mode) - AC 220 V to 240 V | 12.0 W (LAN) (when "Standby Mode" is set to "Standard") |
Standby Mode/Network Standby Mode Activated | after about 10 minutes |
Heat dissipation
AC 100 V to 120 V | 1297 BTU |
---|---|
AC 220 V to 240 V | 1228 BTU |
"Dimensions (W x H x D) (without protrusions)"
"Dimensions (W x H x D) (without protrusions)" | 390 x 134 x 463 mm 15 11/32 x 5 9/32 x 18 7/32 in |
---|
Mass
Mass | 8.0 kg / 17 lb 10 oz |
---|
Supplied accessories
Remote commander | RM-PJ19 |
---|
Optional accessories
Replacement lamp | LMP-F272 |
---|---|
Projection lenses | VPLL-Z1024/Z1032 |
Projection lens adapter | PK-F30LA1 |
Notes
Note | *1 Depends on lens. *2 Ultra high pressure mercury. *3 The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used. *4 With two lamp sequential use. *5 Same time as the lamp replacement is recommended. *6 When attaching the VPLL-ZP41. *7 This value is average. *8 From INPUT A and INPUT B. *9 From INPUT A. *10 Works as an audio switcher function. Output from a selected channel; not available in standby. *11 Depends on resolution. *12 Without wall mount. *13 The values are estimate. *14 Connect to USB Type-A terminal. *15 For replacement. |
---|
Διαθεσιμότητα:
Κατόπιν παραγγελίας
- Κριτικές
Δεν βρέθηκαν δημοσιεύσεις